0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Butt-Tape

Quick Overview

Designed for fast, flat butt-joints.
Butt-Tape - Case of 12-100' Rolls
$229.32
Butt-Tape - Single 200' Roll
$31.85
Butt-Tape - Case of 12-200' Rolls
$382.20
Butt-Tape - Single 100' Roll
$19.11

Availability: In stock

[ Overview ]

COLOR CODE BROWN

Professional tapers and apprentices can achieve the flattest butt-joints possible. Butt-Tape is twice as fast, two times as strong, finishes in one coat, and results in half of the work than using conventional paper or mesh tapes. Ideal for butt-joints and commercial “Top-Out” applications, Butt-Tape leaves butt-joints virtually unnoticeable. Butt-Tape requires no pre-filling, will not shrink, and does not require compound over the pre-finished laminated center. The tape’s outer edge features a diamond punch pattern for a superior bond, faster drying, with no rippling or blistering.

  • Vertical and horizontal butt-joints.
  • Commercial “Top-Out” applications.
  • Ceiling butt-joints that have failed due to movement.
  • Twice as fast as conventional tapes.  50% less compound. 50% less sanding. 50% faster drying time.
  • No pre-filling required. No delayed shrinkage. No beading. No paint blisters.
  • No compound required over laminated area of tape. Just skim coat edges. 
  • Two times stronger than paper tape.
  • Repairs of cracked butt-joints.
  • Can be applied with a Bazooka®, banjo, or by hand.

[ Installation ]

STEP ONE

Apply all-purpose joint compound to butt-joint with a 5” or 6” taping knife. Press Butt-Tape into wet compound by hand. Adjust center line of tape to center over joint.  Wipe down edges. Immediately apply a coat of compound with an 8” or 10” taping knife to each edge of Butt-Tape. Let dry.

STEP TWO

Apply second coat with 10” or 12” taping knife to each edge of Butt-Tape. Let dry and sand.

Additional Information

Bullet Points No
Instructions for Use

STEP ONE

Apply all-purpose joint compound to butt-joint with a 5” or 6” taping knife. Press Butt-Tape into wet compound by hand. Adjust center line of tape to center over joint.  Wipe down edges. Immediately apply a coat of compound with an 8” or 10” taping knife to each edge of Butt-Tape. Let dry.

STEP TWO

Apply second coat with 10” or 12” taping knife to each edge of Butt-Tape. Let dry and sand.

Size No
Instructions PDF No
Submittal PDF /media/wysiwyg/straitflex/submtl/Submtl_Sheets_ButtTape.pdf
Testimonial PDF No
Warranty PDF No