Product was successfully added to your shopping cart.

TIle-Tape

Description

Designed for taping the water-resistant backing board of tile and marble applications; Tile-TapeXM prevents leaks caused by common grout cracks. Tile-TapeXM is applied over seams and corners formed by tile substrate and mold resistant boards in wet areas. Manufactured from Strait-Flex, Tile-TapeXM is manufactured from a composite material giving the tape strength and mold-resistant qualities. Two times stronger than paper or mesh tape, it will not cut or snag when applying tile setting compound with a notched trowel.


  • Produces straight, strong, and water-proof inside, outside corners and angled corners.

  • Designed for taping the water-resistant backing board for tile and marble applications.

  • Prevents leaks caused by common grout cracks.

  • Alkali Resistant.

  • Watertight seams.

  • Mold-Resistant.

  • Will not cut or snag with notched trowel when applying tile setting compound. 

  • Apply over tile substrate, mold-resistant board, or water-resistant board in wet areas (floors, tubs, showers, tile counter tops, tub deck,and steps).

Size: 2-1/4" w (57mm)
COLOR CODE OCEAN BLUE

Installation

Cut Strait-Flex TILE-TAPEXM to desired length.

Fold in half at center crease for inside or outside corners.

For inside corners, print-side faces out.

For outside corners, print-side faces wall.

Using a 5” or 6” taping knife, apply a liberal coat of tile-setting compound such as latex-fortified mortar or Type 1 organic adhesive to flat joints or inside corners. Press TILE-TAPEXM into wet compound.

Adjust if necessary to create a straight line and wipe down with taping knife.

Apply tile-setting compound with notched trowel and install tile or marble.

Additional Information

Bullet Points No
Instructions for Use

Cut Strait-Flex TILE-TAPEXM to desired length.

Fold in half at center crease for inside or outside corners.

For inside corners, print-side faces out.

For outside corners, print-side faces wall.

Using a 5” or 6” taping knife, apply a liberal coat of tile-setting compound such as latex-fortified mortar or Type 1 organic adhesive to flat joints or inside corners. Press TILE-TAPEXM into wet compound.

Adjust if necessary to create a straight line and wipe down with taping knife.

Apply tile-setting compound with notched trowel and install tile or marble.

Size 2-1/4" w (57mm)
Instructions PDF No
Submittal PDF /media/wysiwyg/straitflex/submtl/Submtl_Sheets_TileTape.pdf
Testimonial PDF No
Warranty PDF No
Bulk Order Page URL N/A