Product was successfully added to your shopping cart.

Outlet-Patch

Description

Pre-cut to fit standard receptacle boxes, Outlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes. Outlet-Patch will not fuzz-up during sanding.

Pre-cut to fit standard receptacle boxes.

Repairs and reinforces mis-cut or damaged areas around receptacle box.

Very fast, extremely strong.

Easily installs using standard drywall compounds.

Size: 4-3/4” x 6-1/4” (12cm x 16cm)
COLOR CODE YELLOW

Submittal Sheet

Warranty

Description

Installation

To apply, lightly sand area to be repaired.

Apply drywall compound 1/8"-1/4” thick directly to back of patch.

Place patch over center of repair and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Compound that remains on backside of Outlet-Patch makes patch very rigid in the damaged area.

Apply second coat, let dry, and sand.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Additional

Additional Information

Bullet Points	No
Instructions for Use	To apply, lightly sand area to be repaired. Apply drywall compound 1/8"-1/4” thick directly to back of patch. Place patch over center of repair and wipe down flat to wall using joint knife. Immediately skim-coat patch and let dry. Compound that remains on backside of Outlet-Patch makes patch very rigid in the damaged area. Apply second coat, let dry, and sand. REPAIRS OVER PAINTED SURFACES Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.
Size	4-3/4” x 6-1/4” (12cm x 16cm)
Instructions PDF	No
Submittal PDF	/media/wysiwyg/straitflex/submtl/Submtl_Sheets_OutletPatch.pdf
Testimonial PDF	No
Warranty PDF	/media/wysiwyg/straitflex/instructions/SF_Warranty_Sht.pdf
Bulk Order Page URL	N/A