Product was successfully added to your shopping cart.

Deck-Patch - Case of 17 Patches, 102lf

Description

Contoured to match corrugated steel decking of all manufacturers, Deck-Patch is the fastest way of finishing drywall to corrugated steel decking. Perforated in three foot sections and in the center, Deck-Patch works great as a template for cutting drywall to fit the corrugated decking. Deck-Patch will not fuzz-up during sanding.



  • 102 LF per box.

Size: 21/2
COLOR CODE YELLOW

Installation

To install, apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch in the contour of decking and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Additional Information

Bullet Points N/A
Instructions for Use

To install, apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch in the contour of decking and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Size 21/2
Instructions PDF N/A
Submittal PDF /media/wysiwyg/straitflex/submtl/Submtl_Sheets_DeckPatch.pdf
Testimonial PDF N/A
Warranty PDF /media/wysiwyg/straitflex/instructions/SF_Warranty_Sht.pdf
Bulk Order Page URL N/A