0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Can-Patch Commercial

Quick Overview

Can light patch. Commercial.
Can-Patch Commercial - 10 Count Bag
$14.32
Can-Patch Commercial - Case of 10 Bags of 10 Patches
$143.20
Can-Patch Commercial - Case of 50 Bags of 10 Patches
$715.99

Availability: In stock

[ Overview ]

COLOR CODE YELLOW

Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles. Can-Patch will not fuzz-up during sanding..

  • Mis-cut drywall around ceiling lights and can light receptacles.
  • Ceiling lights and can light relocation.
  • Corrects cutouts that were made too large.
  • Easily installs using standard drywall compounds. 

[ Installation ]

To apply, lightly sand area to be repaired.

Apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch over center of repair and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

Compound that remains on backside of Can-Patch makes patch very rigid in the damaged area.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Additional Information

Bullet Points No
Instructions for Use

To apply, lightly sand area to be repaired.

Apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch over center of repair and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

Compound that remains on backside of Can-Patch makes patch very rigid in the damaged area.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Size No
Instructions PDF No
Submittal PDF /media/wysiwyg/straitflex/submtl/Submtl_Sheets_CanPatch_C.pdf
Testimonial PDF No
Warranty PDF No