Product was successfully added to your shopping cart.

Black-Iron Patch

Description

Pre-cut to fit standard sprinkler pipes, Black-Iron Patch repairs and reinforces mis-cuts or damaged areas around sprinkler pipe holes. Black-Iron Patch will not fuzz-up during sanding.


  • Mis-cut or damaged areas around sprinkler pipe holes.

  • Corrects cutouts that were made too large

  • Easily installs using standard drywall compounds. 

Size: 4-1/2”, 1-3/8” Dia. Hole (11.4cm, 35mm Dia. Hole)
COLOR CODE YELLOW

Installation

To apply, lightly sand area to be repaired.

Apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch over center of repair and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

Compound that remains on backside of Black-Iron Patch makes patch very rigid in the damaged area.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Additional Information

Bullet Points No
Instructions for Use

To apply, lightly sand area to be repaired.

Apply drywall compound 1/8”-1/4" thick directly to back of patch.

Place patch over center of repair and wipe down flat to wall using joint knife.

Immediately skim-coat patch and let dry.

Apply second coat, let dry, and sand.

Compound that remains on backside of Black-Iron Patch makes patch very rigid in the damaged area.

REPAIRS OVER PAINTED SURFACES

Strait-Flex recommends the use of Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound to enhance bondability.

Size 4-1/2”, 1-3/8” Dia. Hole (11.4cm, 35mm Dia. Hole)
Instructions PDF No
Submittal PDF /media/wysiwyg/straitflex/submtl/Submtl_Sheets_BlackIronPatch.pdf
Testimonial PDF No
Warranty PDF /media/wysiwyg/straitflex/instructions/SF_Warranty_Sht.pdf
Bulk Order Page URL N/A